Partial Adanac Heating Jackets welded to the outside of the valve body provide direct heating because the outer shell of the valve becomes the inner shell of the Heating Jacket.
Clamp-on Adanac Heating Jacket design is a self-contained vessel that fits around the valve body. The clamp-on Heating Jacket can be removed from the valve allowing for maintenance or replacement.
Where Full Length heating jackets are required Adanac will modify the standard flanged valve to either Over-size Flanged or Wafer Pattern allowing the full length of the valve to be heated without obstructing the end flange.
Heating Jacket materials include Carbon Steel (BS EN 10025 S275JR) and Austenitic Stainless Steel (ASTM A240 316-L)
Adanac Heating Jackets are suitable for a variety of heating media including Hot Water, Steam and Oil. And are available with threaded, socket weld, butt weld or flanged pressure connections.
Adanac’s standard heating jacket is designed to operate at 150°C with a maximum pressure of 10barg. Higher temperatures and pressures required to meet specific user requirements can normally be accommodated.